Construction Solutions
01
GCS Formwork System
The GCS Formwork product will reduce the time required to assemble the shutters to 50% and, therefore, significantly reduce the cost associated with project implementation. It is considered an environmentally friendly product, as it maintains extensive use of wood in construction and other industries. Moreover, it does not require special skills to assemble shutters only a few basic understanding of the concept. Using the Pin-Wedge will make it easier to attach one panel to the other without having to screw and hammer into your old plywood fitting.
Our Products
-
Standard Column
-
Round Column
1. Standard Column
Our new GCS series formwork is a state of the art design that provide several advantages while serving the same Formwork purpose. The Formwork consist of a single steel sheet, which makes it a lightweight steel panel that can be carried by two workers without the need for a crane.
The side frame is consist of a flat bar to form an upright angle to the sheet. The flat bar will be used to join panels horizontally using the side holes.
The upper and lower frame consists of a perforated flat bar, the number of holes varies based on the panel size. These holes are used for cascading the panels vertically to meet the desired height of the columns and walls.
For every 25cm, there are horizontal belts made of folded steel sheets to form a semi-rectangle shape. For sizes above 40cm, there is a total of 8 horizontal belts in every 3.5 meters panel height. On levels 1, 3, 6, and 9 there are two rectangular tubes at each level that provide horizontal support and Tie-Rod Holder Belt. The two rectangular tubes are located above and below the Tie-Rod holes.
We can meet your project-specific heights, as our panel can be fabricated in the range of 25-400cm. A height of 400cm can be achieved in a single panel or with an extension, as per the customer's requirements.
In today’s construction technology, the insufficiency of qualified staff causes the installation process to take up more time and cost. This is why our systems are developed so that they are easy to assemble and barely require a guide during installation. No nails are needed during the installation of our Formwork, simply use a hammer to fix the pin and wedge during this process.
The fact that our Formworks are ready to be installed as soon as they arrive at the construction site, their ease of mobility, and the ability to obtain different measures with only a few accessories boost the competitive advantage of economical construction.
2. Round Formwork Column Donation
Our new GCS round formwork is a state-of-the-art design that provides several advantages while serving the same Formwork purpose. The Formwork consists of a single steel sheet, which makes it a lightweight steel panel that can be carried by two workers without the need for a crane.
The side frame is consisting of a flat bar to form an upright angle to the sheet. The flat bar will be used to join the two halves of the round column using the side holes.
The upper and lower frame consists of a curved flat bar. Optionally, the flat bar can have several holes which vary based on the panel size. These holes are used for cascading the panels vertically to meet the desired height of the columns and walls.
For every 50cm, there are horizontal belts made of curved flat bars to provide additional support to the panel. There is a total of 7 horizontal belts in every 350cm panel height. Additionally, at least one Flat Bar vertical support will be included in each panel, the number of flat bars increased based on the panel sizes.
We can meet your specific project heights, as our panel can be fabricated in the range of 100-400cm.
